Like us on FacebookTow Trucks Click To ViewLight DutyMedium DutyHeavy DutyCarrierLandoll Trailers
TOLL FREE:(888) 553-5209
Miller Showroom

The LCG Carrier - Low Center of Gravity

20 Series



Full Length SubframePositive lock down system
Full Length Subframe Wear PadsDual illuminated controls
Painted with Black Acrylic UrethaneBack-up alarm
Driver's & Passenger Side Chain TraysHydraulic Pump
Hydraulic Dock StabilizerMud Flaps
7 Tie-Down Points (2 Front, 5 Rear)Federal Standard 108 Lighting
Floor Level Sides with Stake Pockets12,000 lb. planetary winch
Two Front Safety Chains3/16” deck plate
Bed anti-tilt featureL.E.D. lights
Dual tilt cylindersManual clutch winch release
Dual bed extension cylindersCable tensioner


Combination Wheel Lift & Dock Stabilizer
                  - 4,000 lb. wheel lift
Window Guard in the Cab Protector
Combination Wheel Lift & Dock Stabilizer
                  - 6,000 lb. wheel lift (requires rear axle)
Tri-box toolboxes (for frame mounted pylon) - (requires additional CA)
Removable Side RailsLocking Chain Rack (for bed mounted cab protector)
Rub Rails (Trailer Style w/Integrated Stake Pockets)Switch Panel
Tool CompartmentsWork Area & Emergency Lighting
PTOOptional Color on Top of Deck & Side Rails
Smooth Floor in Lieu of Deck PlateWired or Wireless Winch Remote
1/4" Steel Floor (Smooth or Deck Plate)15,000 lb. Planetary Winch
Apitong Wood Floor20,000 lb. Planetary Winch
Rumber FlooringWinch Air Clutch release for 12,000, 15,000 and
                    20,000 lb. Winches
Additional Key SlotsGalvanized Subframe       
Dual Key Slots Down Center of DeckTrailer Ball kit for the Optional Wheel Lift
Bed Mounted Cab ProtectorFork Holders & Lift Forks for
                     the Optional Wheel Lift
Frame Mounted Pylon  (Requires 6, 8 or 12" Additional CA depending on pylon choice) Pintle Hitch Adapter for the Optional Wheel Lift


Load rating  20,000 lbs
Body Length  24', 25', 26', 27', 28', 29', 30'
Body Floorplate Thickness  3/16"
Body Width (Outside)  102"
Body Width (Inside)*  97"
Body Mainbeam  6" I-Beam
Crossmembers  3"x 3" Corten Tube
Crossmember Spacing  8" On Center
Body Sides  6" x 4" x 3/8" Angle
Subframe Rails  5" x 3" x 1/2" H.S. Tube
Subframe Hinge  1 Piece 2" Diameter
Cable 12,000 lb. Winch
 15,000 lb. Winch
 20,000 lb. Winch
7/16 x 50'
 1/2 x 50'
 9/16 x 75'
Bed Tilt Cylinders  4" Bore
Bed Extension Cylinders (2)  3 1/2" x 120" Stroke
Wheel Lift Ratings 4,000 6,000
Lift Rating Extended 4,000 lbs.6,000 lbs.
Tow Rating 10,000 lbs. 20,000 lbs.
* Inside Bed Width Applies to Optional Removable Rails


Fuel tanks must be under cab and not to extend behind front of the bed. Fuel fill must not be behind cab.

The preferred location for the battery box is under the passenger seat or under the cab. Battery boxes in other locations may require relocation.

Chassis components directly behind the cab must be 2 inches below the top of the truck frame to clear the bed rails. Air tanks in the tilt cylinder zone will need to be relocated.

*Minimum space of 49” required between the inside tires. With larger tire size of 275, 11R and above, aluminum inside wheels are required.

Air-bag rear suspension is recommended for lower load angle.
Minimum Frame Height38"
Maximum Frame Height43"
Minimum GVWR 31,000 lbs. 
Minimum Frame RBM (Each Rail)   
24 - 28' 1.8 Million Inch Pounds 
29 - 30' 2.1 Million Inch Pounds 
Minimum Cab to Axle (clear )**   (with Lift Axle)
24' 166"174"
25' 170"178"
26' 182"190"
27' 194" 
28' 206" 
Minimum Frame Length Behind Center of Rear Axle 34"  
Minimum GVWR 50,000 lbs. 
Minimum Frame RBM (Each Rail) 2.5 Million Inch Pounds 
Minimum Cab to Bogie (clear )**   
26' 174" 
27' 182" 
28' 190" 
29' 198" 
30' 206" 
Minimum Frame Length Behind Center of Rear Axle 54"  
**Use back of vertical exhaust for the usable CA and effective back of cab.
NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities.
Specifications shown are approximations and may vary depending on chassis selected.
Platform rating is based on an equally distributed load. Actual payload carrying capacity is
determined by the curb weight of the chassis and equipment and should not exceed the
GVWR of the Chassis.
Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.   Some equipment shown is optional.