Like us on FacebookTow Trucks Click To ViewLight DutyMedium DutyHeavy DutyCarrierLandoll Trailers
TOLL FREE:(888) 553-5209
Miller Showroom

12 Series LCG™

Century has brought a whole new dimension to transport with the 12 Series LCG™ (Low Center of Gravity) carrier.  The patent-pending design lowers the deck height 5 to 6 inches over conventional carriers. The lower height allows for the transport of taller loads, such as forklifts or man-lifts, that may be over-height on a conventional carrier and also provides better stability during transport. The operator can easily secure loads or tie down vehicles standing on the ground, thanks to the lower height. When mounted on most air ride chassis, with the air dumped, the 12 Series LCG™ has less than an 11-degree load angle, making it ideal for loading low-clearance vehicles or equipment without using ramps or wood. For fast and easy unloading of damaged vehicles or equipment, the 12 Series LCG™ has a 20-degree dump angle. Your new 12 Series LCG™ is available in 21', 21 1/2 ' and 22' deck lengths with a capacity of 12,000 pounds and a wide variety of options to fit your specific transport needs.


Platform Available in Aluminum or Steel11 Key Slot Package  (Steel)
Floor Level Sides w/Stake Pockets  (Steel)4 Key Slot Package  (Aluminum)
Tri-Hollow Tube Rails  (Aluminum)Full Length Slide Pads
Right and Left Chain TraysBed Anti-tilt Lockout
Safety Chains   (2 front, 2 rear)Positive Lock-Down
Painted in Black Acrylic Enamel   (Steel)Two Lift Cylinders
Left & Right Side Illuminated ControlsOne Extension Cylinder
Federal Standard #108 LED LightingWinch Clutch Release
8,000-lb. Hydraulic Winch w/50' CableBack-Up Lights & Alarm
Full Function Wheel Lift SystemCable Tensioner
Slide-In L-Arms With Anti-Theft StorageCable Roller Guide
Pre-Wired Electrical Junction BoxTow Light Socket
Adjustable Rear StabilizerMud Flaps
Bed Built 102" WideHydraulic Pump


Frame-Mounted Headboard    (Requires 6" Additional CA)
Tribox Frame-Mounted Headboard    (Requires 8" Additional CA)
Optional Color on Top of Deck and Side Rails  (Steel)
Smooth Floor in lieu of Tread Plate  (Steel)Bed-Mounted Headboard
Solid Tube Side Rails  (Steel, N/C)Aluminum Overlay Rails  (Steel)
Solid Narrow Profile Rails  (Aluminum, N/C)Galvanized Subframe
Steel Removable Tube Rails8 Key Slot Package  (Aluminum)
Aluminum Removable Tube RailsAdditional Key Slots
Aluminum Removable Blade RailsWood Floor
Wired or Wireless Winch RemoteRumber Flooring
Steel or Aluminum Tool CompartmentsPTO
Work Lights  (Rear, Pylon or Winch-Mounted)Switch Panel
Various Chain & Strap AssembliesEmergency Lighting
Century's 3-Way Pivoting L-Arm SystemAuto-Grip Wheel Lift
Dock Stabilizer in lieu of Wheel LiftSide Mount Winch
8,000-lb. or 12,000-lb. Planetary WinchRight Approach Option   (Steel)
SP8000 Sidepuller  (Requires 12" Additional CA)SST Option


Load Rating *12,000 lbs
Platform Length 20.5', 21', 21.5', 22'
Platform Floorplate Thickness3/16"
Platform Width (Outside)102"
Platform Width (Inside) **96.5" or 101"
Platform Mainbeam6" I-Beam
Platform Crossmembers (Steel)2" x 2" Cor-ten Tube
Platform Crossmembers (Aluminum)2 1/4"
Crossmember Spacing (Steel)8" On Center
Crossmember Spacing (Aluminum)4" On Center
Subframe Rails5" x 3" x 5/16" H.S. Tube
Rear Pivot1 Piece 1 1/2" Diameter
Winch (1st Layer)8,000 lb. Worm
Cable3/8" x 50'
Bed Tilt Cylinders3" Bore
Bed Extension Cylinders3.5" x 120" Stroke
Wheel Lift Reach at Full Extension66"
Wheel Lift Rating (Extended)  4,000 lbs.
Tow Rafting10,000 lbs.
 *  Platform rating is based on equally distributed load.
** Inside Bed Widths will vary based on Siderail Option


Fuel tanks must be under the cab.  Fuel tanks can extend up to 6 inches behind the cab only in combination with a frame mounted pylon.    Fuel fill must not be behind the cab.
The preferred location for the battery box is  under the passenger seat or under the cab, battery boxes in other locations may require relocation. 
Minimum Frame Length
       Behind Center of Rear Axle

Minimum Frame Height33"
Maximum Frame Height38"
Wheel & Tire Size*19.5
GVWR19,500 lbs. - 26,000 lbs.
Minimum Frame RBM (Each Rail)600,000 Inch Pounds
Minimum Cab to Axle (Clear ‡) 

*  A minimum of 49" between the inside of the rear tires is required.
 ‡ The outside frame rails of the chassis extending behind the cab must be free of fuel tanks, air tanks, exhaust stacks, etc.

The LCG™ carrier is not compatible with chassis that have inboard mid-ship fuel tanks such as the Ford 550, GM 5500, and Dodge 5500.

Air-bag rear suspensions are recommended for the lowest possile load angle but the LCG™ carrier can be mounted on some chassis with leaf spring suspensions.  Most chassis components behind the cab outside the frame must be at least 2 inches below the top of the truck frame to clear the bed slide rails. 

NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Platform rating is based on an equally distributed load. Actual payload carrying capacity is determined by the curb weight of the chassis and equipment and should not exceed the GVWR of the Chassis. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional.